中英文e2等級50g標準砝碼證書范本 上海實潤實業(yè)有限公司 Shanghai shirun industrial co. LTD 砝 碼 鑒 定 合 格 證 Qualification Certificate of Weight Appraisal 等 級：_E2______________________ Grade: E2______________________ 編 號：_3421_____________ No: 3421______________ 材 質：_316無磁不銹鋼____________ aterial: _316 magnetic free stainless steel_ 數(shù) 量 1個_____________________ Quantity: 1pcs_____________________ 密 度：_ 7.94g/cm3___________________ Density: ___7.94g/cm3_______________ 規(guī) 格：_ 50g________________________ Rules: ___ 50g_______________________ 鑒定標準：_ JJG99-2006_________________ Identification criteria： JJG99-2006_ 鑒定結果：_________________________ Identification results： Qualified 鑒定人：__姜紅_________ The surveyor： Hong Jiang 復核人： _陳善龍____ __ Reviewer： ShanLong Chen 檢定日期：__2020__年__11__月_30日 Check the date： November 30, 2020 有效日期：___2021__年_11月__30_日 The effective date: November 30, 2021 注意事項：在行任何測試之前，砝碼都必須要清潔。清潔過程不能去除任何塊砝碼材料。砝碼在抓取和儲存時都必須保持其清潔。清潔時不得改變砝碼的表面特性（如：劃傷砝碼）。如果砝碼上有灰塵，可以用干凈的無水乙醇清潔砝碼或局部。帶有調節(jié)腔的砝碼不得浸入溶液中，以免液體浸入腔體。 Note: before any test, the weights must be cleaned. The cleaning process does not remove any weight material. Weights must be kept clean while being grabbed and stored. Do not change the surface properties of the weights (e.g. scratch weights) during cleaning. If the weight is dusty, clean the weight or area with clean anhydrous ethanol. Weights with regulating Chambers should not be immersed in solution to prevent the liquid from entering the chamber. 
|
